Cache the status of the control register in the driver to avoid reads

pull/4/head
Diego Barrios Romero 2018-10-31 06:50:26 +01:00
parent a12e165281
commit ca36814a09
4 changed files with 47 additions and 34 deletions

View File

@ -9,25 +9,15 @@ where
DI: ReadData<Error = E> + WriteData<Error = E>
{
/// Enable the oscillator (set the clock running).
///
/// (Does not alter the device register if already running).
pub fn enable(&mut self) -> Result<(), Error<E>> {
let control = self.iface.read_register(Register::CONTROL)?;
if (control & BitFlags::EOSC) != 0 {
self.iface.write_register(Register::CONTROL, control & !BitFlags::EOSC)?;
}
Ok(())
let control = self.control;
self.write_control(control & !BitFlags::EOSC)
}
/// Disable the oscillator (stops the clock).
///
/// (Does not alter the device register if already stopped).
pub fn disable(&mut self) -> Result<(), Error<E>> {
let control = self.iface.read_register(Register::CONTROL)?;
if (control & BitFlags::EOSC) == 0 {
self.iface.write_register(Register::CONTROL, control | BitFlags::EOSC)?;
}
Ok(())
let control = self.control;
self.write_control(control | BitFlags::EOSC)
}
/// Force a temperature conversion and time compensation with TXCO algorithm.
@ -35,6 +25,7 @@ where
/// The *busy* status should be checked before doing this. See [`is_busy()`](#method.is_busy)
pub fn convert_temperature(&mut self) -> Result<(), Error<E>> {
let control = self.iface.read_register(Register::CONTROL)?;
// do not overwrite if a conversion is in progress
if (control & BitFlags::TEMP_CONV) == 0 {
self.iface.write_register(Register::CONTROL, control | BitFlags::TEMP_CONV)?;
}
@ -45,9 +36,9 @@ where
///
/// (Does not alter the device register if already enabled).
pub fn enable_32khz_output(&mut self) -> Result<(), Error<E>> {
let control = self.iface.read_register(Register::STATUS)?;
if (control & BitFlags::EN32KHZ) == 0 {
self.iface.write_register(Register::STATUS, control | BitFlags::EN32KHZ)?;
let status = self.iface.read_register(Register::STATUS)?;
if (status & BitFlags::EN32KHZ) == 0 {
self.iface.write_register(Register::STATUS, status | BitFlags::EN32KHZ)?;
}
Ok(())
}
@ -56,9 +47,9 @@ where
///
/// (Does not alter the device register if already disabled).
pub fn disable_32khz_output(&mut self) -> Result<(), Error<E>> {
let control = self.iface.read_register(Register::STATUS)?;
if (control & BitFlags::EN32KHZ) != 0 {
self.iface.write_register(Register::STATUS, control & !BitFlags::EN32KHZ)?;
let status = self.iface.read_register(Register::STATUS)?;
if (status & BitFlags::EN32KHZ) != 0 {
self.iface.write_register(Register::STATUS, status & !BitFlags::EN32KHZ)?;
}
Ok(())
}
@ -67,4 +58,10 @@ where
pub fn set_aging_offset(&mut self, offset: i8) -> Result<(), Error<E>> {
self.iface.write_register(Register::AGING_OFFSET, offset as u8)
}
fn write_control(&mut self, control: u8) -> Result<(), Error<E>> {
self.iface.write_register(Register::CONTROL, control)?;
self.control = control;
Ok(())
}
}

View File

@ -362,7 +362,8 @@ impl BitFlags {
const OSC_STOP : u8 = 0b1000_0000;
}
const DEVICE_ADDRESS: u8 = 0b110_1000;
const DEVICE_ADDRESS : u8 = 0b110_1000;
const CONTROL_POR_VALUE: u8 = 0b0001_1100;
/// IC markers
pub mod ic {
@ -380,6 +381,7 @@ use interface::{ I2cInterface, SpiInterface };
#[derive(Debug, Default)]
pub struct Ds323x<DI, IC> {
iface: DI,
control: u8,
_ic: PhantomData<IC>
}
@ -393,6 +395,7 @@ where
iface: I2cInterface {
i2c,
},
control: CONTROL_POR_VALUE,
_ic: PhantomData
}
}
@ -413,6 +416,7 @@ where
iface: I2cInterface {
i2c,
},
control: CONTROL_POR_VALUE,
_ic: PhantomData
}
}
@ -435,6 +439,7 @@ where
spi,
cs: chip_select
},
control: CONTROL_POR_VALUE,
_ic: PhantomData
}
}

View File

@ -4,7 +4,9 @@ use self::ds323x::{ Ds323x, interface, ic };
use hal::i2c::{ Mock as I2cMock, Transaction as I2cTrans };
use hal::spi::{ Mock as SpiMock, Transaction as SpiTrans };
pub const DEVICE_ADDRESS: u8 = 0b110_1000;
pub const DEVICE_ADDRESS : u8 = 0b110_1000;
#[allow(unused)]
pub const CONTROL_POR_VALUE: u8 = 0b0001_1100;
pub struct Register;

View File

@ -6,9 +6,9 @@ use hal::spi::Transaction as SpiTrans;
mod common;
use common::{ DEVICE_ADDRESS as DEV_ADDR, Register, new_ds3231,
new_ds3232, new_ds3234, destroy_ds3231, destroy_ds3232,
destroy_ds3234, BitFlags as BF };
destroy_ds3234, BitFlags as BF, CONTROL_POR_VALUE };
macro_rules! call_method_test {
macro_rules! call_triple_test {
($name:ident, $method:ident, $i2c_transactions:expr, $spi_transactions:expr) => {
mod $name {
use super::*;
@ -19,15 +19,24 @@ macro_rules! call_method_test {
};
}
macro_rules! call_method_test {
($name:ident, $method:ident, $register:ident, $value_enabled:expr) => {
call_triple_test!($name, $method,
[ I2cTrans::write(DEV_ADDR, vec![Register::$register, $value_enabled]) ],
[ SpiTrans::write(vec![Register::$register + 0x80, $value_enabled]) ]);
};
}
macro_rules! change_if_necessary_test {
($name:ident, $method:ident, $register:ident, $value_enabled:expr, $value_disabled:expr) => {
mod $name {
use super::*;
call_method_test!(do_nothing_if_not_necessary, $method,
[ I2cTrans::write_read(DEV_ADDR, vec![Register::$register], vec![$value_enabled]) ],
[ SpiTrans::transfer(vec![Register::$register, 0], vec![Register::$register, $value_enabled]) ]);
call_triple_test!(do_nothing_if_not_necessary, $method,
[ I2cTrans::write_read(DEV_ADDR, vec![Register::$register], vec![$value_enabled]) ],
[ SpiTrans::transfer(vec![Register::$register, 0], vec![Register::$register, $value_enabled]) ]);
call_method_test!(change, $method,
call_triple_test!(change, $method,
[ I2cTrans::write_read(DEV_ADDR, vec![Register::$register], vec![$value_disabled]),
I2cTrans::write(DEV_ADDR, vec![Register::$register, $value_enabled]) ],
@ -37,12 +46,12 @@ macro_rules! change_if_necessary_test {
};
}
change_if_necessary_test!(enable, enable, CONTROL, 0xFF & !BF::EOSC, 0xFF);
change_if_necessary_test!(disable, disable, CONTROL, 0xFF, 0xFF & !BF::EOSC);
change_if_necessary_test!(conv_temp, convert_temperature, CONTROL, 0xFF, 0xFF & !BF::TEMP_CONV);
change_if_necessary_test!(en_32khz_out, enable_32khz_output, STATUS, 0xFF, 0xFF & !BF::EN32KHZ);
call_method_test!(enable, enable, CONTROL, CONTROL_POR_VALUE & !BF::EOSC);
call_method_test!(disable, disable, CONTROL, CONTROL_POR_VALUE | BF::EOSC);
change_if_necessary_test!(en_32khz_out, enable_32khz_output, STATUS, BF::EN32KHZ, 0);
change_if_necessary_test!(dis_32khz_out, disable_32khz_output, STATUS, 0xFF & !BF::EN32KHZ, 0xFF);
change_if_necessary_test!(clr_stop, clear_has_been_stopped_flag, STATUS, 0xFF & !BF::OSC_STOP, 0xFF);
change_if_necessary_test!(conv_temp, convert_temperature, CONTROL, CONTROL_POR_VALUE | BF::TEMP_CONV, CONTROL_POR_VALUE & !BF::TEMP_CONV);
set_param_test!(aging_offset_min, set_aging_offset, AGING_OFFSET, -128, 128);
set_param_test!(aging_offset_max, set_aging_offset, AGING_OFFSET, 127, 127);
set_param_test!(set_aging_offset_min, set_aging_offset, AGING_OFFSET, -128, 0b1000_0000);
set_param_test!(set_aging_offset_max, set_aging_offset, AGING_OFFSET, 127, 127);