31 lines
1.2 KiB
Markdown
31 lines
1.2 KiB
Markdown
# Waveshare-Rust-RP2040
|
|
### This is a template to use a waveshare e-ink screen with the rp-pico board andrp-pico HAT using Rust.
|
|
|
|
## Prepare your system
|
|
- Install the toolchain
|
|
- `rustup target install thumbv6m-none-eabi`
|
|
- Install the linker (with [flip-link](https://github.com/knurling-rs/flip-link) you will have zero-cost stack overflow)
|
|
- `cargo install flip-link`
|
|
- Install elf2uf2-rs
|
|
- `cargo install elf2uf2-rs`
|
|
- Install the pico-sdk
|
|
- (search on the Internet, it's really boring and I don't remember how to do it lol)
|
|
- Install the gcc-arm corresponding to the board
|
|
- (The same as with pico-sdk... sorry)
|
|
|
|
## Usage
|
|
1. Clone the repo
|
|
- `git clone https://gitlab.com/kirbylife/waveshare-rust-rp2040`
|
|
2. Build with --release
|
|
- `cargo build --release`
|
|
3. Convert to uf2
|
|
- `elf2uf2-rs target/thumbv6m-none-eabi/release/waveshare_rust_rp2040 binary.uf2`
|
|
4. Connect your rp-pico to the PC with in BOOTSEL mode
|
|
5. Grab your file `binary.uf2` and drop it inside of the RPI-RP2 volume
|
|
6. Enjoy :) (apply restrictions)
|
|
|
|
## License
|
|
This template does not have any license but the [RustMX](https://t.me/RustMX) can have it.
|
|
|
|
written in Rust the ran originally in the Raspberry Pi Pico with a Waveshare 7.5 inch e-ink screen.
|